PhotoEZTM is a light-sensitive emulsion applied to a fine mesh
nylon screen for the purpose of making screen stencils. By exposing the
emulsion covered screen to daylight or fluorescent light,
the emulsion changes into a tough coating. When a black and white image
printed on clear acetate or 20-pound paper is placed over the screen and exposed to daylight, the emulsion under the black areas remains water
soluble and washes off creating an open mesh for paint to pass through.
The black image must be fully opaque to effectively block the light.
An image printed either on an ink jet or laser printer is best. The instructions that accompany PhotoEZ include an exposure chart
for various types of light sources along with detailed directions for making
and using the screens.
Before it's developed, PhotoEZ is heat and light sensitive. Unused
PhotoEZ should be stored in a cool place like the refrigerator and kept away from light in
the black envelope it comes in.
Once developed, it
loses this sensitivity and can be used over and over again.
Order PhotoEZ now!
|
